The Aptura LT Self-Retracting Lanyard (SRL) has an extensive range of features which make it one of the most comprehensive SRL’s on the market.

The tie-back model EZ Stop II eliminates the need for a separate anchorage connector. All EZ Stop II lanyards utilize a controlled tearing action when subjected to fall arrest forces, limiting arresting forces to no more than 900 lbs.

The unique stretchable design of the ShockWave2 Shock-Absorbing Lanyard allows it to contract to 4' in length when no tension is present, reducing risk of tripping.

EZ Stop II 100% Tie-Off Shock Absorbing Lanyard is a double-leg shock-absorbing lanyard made for work situations where 100% tie-off is needed. Internal elastic band expands to 6' when pulled, then contracts down to 4-1/2', keeping it out of the worker's way.

The fact that the EZ Stop Retrax is retractable makes it unique among other shock-absorbing lanyards.

The Force2 is a shock-absorbing lanyard designed to be attached to an anchorage point at the worker’s feet when no overhead anchorage is available, a situation which creates a much greater free fall distance.

The fact that the EZ Stop Retrax is retractable makes it unique among other shock-absorbing lanyards.

The fact that the EZ Stop Retrax is retractable makes it unique among other shock-absorbing lanyards.

Provides arc flash protection up to 40 cal/cm2, and is designed for utility and maintenance workers. Durable 9500-lb nylon webbing has web loop attachment points which reduce weight and reduce metallic hardware. 6’ integral Shock-Absorbing Lanyard limits fall arrest forces to 900 lbs or less. The nylon web Lanyard has a sewn loop on the shock-absorber end and a snap hook on the lanyard leg. Meets applicable OSHA and ANSI standards. Meets ASTM F887-05 standards.

The Workman Single-Leg Shock-Absorbing Lanyard, a critical component of personal fall arrest systems, connects the back D-ring of a full body harness to a qualified anchorage point. Made of lightweight, durable 1-3/4” yellow polyester webbing.

The Workman Twin-Leg Shock-Absorbing Lanyard, a critical component of personal fall arrest systems, connects the back D-ring of a full body harness to a qualified anchorage point. Made of lightweight, durable 1-3/4” yellow polyester webbing.

The FP Diamond Shock-Absorbing Lanyard features a strong durable sheath with a highly visible deployment tag.

The strong, safe BackBiter Lanyard is specifically designed for tying back at any angle.

The Manyard II Lanyard contains shock-absorbing inner core material surrounded by a super-strong outer jacket.

The Manyard Lanyard contains shock-absorbing inner core material surrounded by a super-strong outer jacket.

This lanyard is designed with an inner core of shock-absorbing material that expands to a maximum of 3-1/2", allowing a soft, stable stop in case of fall.

The StretchStop Lanyard stretches from 4 to 6', offering excellent worker mobility.

This lanyard is designed with an inner core of shock-absorbing material that expands to a maximum of 3-1/2", allowing a soft, stable stop in case of fall.

The unique stretchable design of the ShockWave2 Shock-Absorbing Lanyard allows it to contract to 4' in length when no tension is present, reducing risk of tripping.

The EZ Stop II Lanyard utilizes a tearing action in the shock-absorbing pack to keep the fall arresting forces under 900 lbs.

The EZ Stop III Lanyard combines exceptional strength and ease of use into one safe and effective shock-absorbing lanyard.

EZ Stop II 100% Tie-Off Shock Absorbing Lanyard is a double-leg shock-absorbing lanyard made for work situations where 100% tie-off is needed. Internal elastic band expands to 6' when pulled, then contracts down to 4-1/2', keeping it out of the worker's way.

EZ Stop® II shock absorbing lanyards are designed for versatility and are available in many variations including this tie-back model that eliminates the need for a separate anchorage connector. All EZ Stop® II lanyards utilize a controlled tearing action when subjected to fall arrest forces, limiting arresting forces to no more than 900 lbs.

The Force2 is a shock-absorbing lanyard designed to be attached to an anchorage point at the worker’s feet when no overhead anchorage is available, a situation which creates a much greater free fall distance.

The Rebar Positioning Lanyard is designed for workers who need to position or restrain themselves when working on rebar construction, such as rebar tying.

The Rebar Positioning Lanyard is designed for workers who need to position or restrain themselves when working on rebar construction, such as rebar tying.